Urochem 304 Resin
TWO-PART, LOW VISCOSITY EPOXY RESIN
DESCRIPTION
Urochem 340 Resin is a two-part, low viscosity epoxy resin.
SURFACE PREPARATION
Concrete surfaces should be clean sound and dry, free from laitance, paint, oil, grease, shutter oil and any residual curing compounds.
TYPICAL APPLICATIONS
Urochem 340 Resin should only be used by professionals.
Binder for self-leveling mortars. Can be used on low to medium absorbent substrates.
MIXING
Do not split kits. Mix with a slow speed drill fitted with a flat paddle. Add the contents of the activator to the base component in a suitable mixing vessel, ensuring complete transfer of both resin components. Mix for one minute before using as required.
ADVANTAGES
- Low viscosity
- Excellent bond strength.
- Excellent penetrating properties.
- Easy to apply.
- High tensile, flexural, and compressive strength.
- Excellent adhesion to steel and concrete.
TYPICAL PROPERTIES – AS PER UROCHEM QC
The below properties are based on in-house testing methodologies.
Appearance
Clear liquid
Viscosity @ 25°C(cP)
80
Amine Value (mg KOH/g)
360
Specific Gravity @ 25°C
1.04
Flash Point (closed cup) (°C)
110
Equivalent Wt/{H}
83
TYPICAL HANDELING PROPERTIES
Mixed Viscosity @ 25°C
860
Gel time (min) (150g mix @ 25°C)
32
Gel time (min) (150g mix @ 10°C)
106
Thin Film Set Time @ 25°C
3
Thin Film Set Time @ 10°C
8
Thin Film Set Time @ 4.4°C
10
Peak Exotherm (150g mix @ 25°)
121
TYPICAL PERFORMANCE
7 DAY CURE @ 25°C